top of page
Search

Coil Spring Forming Machine Selection Guide

380154999
Nov 13
5 min read


Choosing the right coil spring forming machine is not simply a matter of comparing purchase prices. Wire diameter, spring geometry, production volume, tooling requirements, and long-term maintenance all shape the total operating result.


Dongzheng Spring Machine has manufactured spring coiling equipment in Dongguan since 2004. Annual production capacity exceeds 150 machines, and more than 150 units have been sold outside China to customers in 15+ countries. The company’s HSM-CNC20 alone has accumulated more than 100 installations worldwide.


This guide explains the practical differences between CAM and CAMLESS systems, provides a model comparison, and shows why machine construction details matter when evaluating a wear-resistant spring making machine.


CAM vs CAMLESS Spring Coiling Systems


CAM systems use mechanical cams to control the forming process. The cams are adjusted mechanically or through motor-assisted positioning to regulate wire feed, tool movement, and spring formation.


CAMLESS systems replace these mechanical cam mechanisms with servo-driven axes. Commands from the CNC controller coordinate the forming movements directly.


The main selection differences are:


  • CAM systems are often more familiar to workshops with conventional spring-coiling experience.

  • CAMLESS machines provide flexible programming for different spring dimensions and production changes.

  • Servo-controlled CAMLESS systems can reduce mechanical adjustment requirements when changing products.

  • CAM machines may be practical for standardized, high-volume production runs.

  • CAMLESS machines are generally more suitable when a factory needs frequent setup changes or multiple spring geometries.


The better choice does not depend on the label alone. It depends on the actual product range, required output, and operator experience.


Comparing Dongzheng Spring Machine Models


Dongzheng offers both CAM and CAMLESS configurations across several wire ranges.


Model

Forming technology

Wire diameter

Key configuration or application

HSM-CNC08

Spring coiling machine

0.08–1.0 mm

Precision and small-diameter springs

HSM-CNC20

CAM spring machine

0.2–2.0 mm

General-purpose production

HSM-CNC30

Spring coiling machine

0.8–3.0 mm

Medium-diameter wire

HSM-CNC40

CAM spring machine

1.8–4.5 mm

Heavier spring applications

HSM-CNC60

CAM spring machine

2.0–6.0 mm

Available with or without wire rotation

HSM-CNC1008

CAMLESS spring machine

0.1–1.0 mm

Small-diameter flexible forming

HSM-CNC1025

CAMLESS spring machine

0.2–2.5 mm

Programmable multi-axis production

HSM-CNC1045

CAMLESS spring machine

1.8–4.5 mm

Wire-rotary configuration


These ranges should be checked against the actual wire material and finished spring dimensions during machine selection. A machine’s nominal wire range does not automatically mean that every diameter in that range is suitable for every tooling package.


How to Evaluate a Wear-Resistant Spring Making Machine


Spring machines operate under continuous cyclic loading. Slides, feeder components, cam arms, and tooling surfaces therefore affect not only initial accuracy but also consistency over time.


A practical inspection should cover the following points:


  • Feed slot and slide materials selected for resistance to wire contact

  • Cam-arm geometry and the movement range required by the spring

  • Integrated wire-feed box construction

  • Tooling retention and adjustment methods

  • Servo response during short forming cycles

  • Access to lubrication and wear components

  • Availability of replacement parts and technical support


In a documented 2026 factory visit, a customer compared several spring-machine suppliers and examined the wear materials used in the chute and slide, the cam-arm design, and the integrated wire-feed box. Although the quoted price was higher than some alternatives, the customer selected three HSM-CNC20 machines after the on-site comparison.


This example illustrates an important procurement point: the initial quotation should be compared with the machine structure, not treated as the only selection criterion.


Copper Wire Coil Machine Considerations


Copper wire presents different forming requirements from steel wire. Material stiffness, surface condition, alloy temper, and spring pitch all influence the final dimensions.


When configuring a copper wire coil machine, determine the following before ordering:


  • The copper alloy and wire diameter

  • Actual wire diameter range across production

  • Tensile strength and temper

  • Required pitch, coil count, and total length

  • Whether spring ends must be closed, ground, or positioned

  • Whether wire rotation is required

  • The target tolerance and acceptable production speed


A copper wire coil machine should be tested with the intended material rather than only demonstrated with a different wire type. This helps verify feed behavior, forming force, and dimensional repeatability under realistic conditions.


Production Evidence from Customer Installations


A Vietnamese customer has used the HSM-CNC20 since 2010. According to the reported operating data, daily output increased by 35% after eight months, while dimensional accuracy remained stable at ±0.01 mm.


Another customer in Vietnam purchased one HSM-CNC20 in March 2026 after comparing its operating stability with machines from other suppliers.


In Brazil, a customer purchased two HSM-CNC20 machines in 2022. The customer’s WeChat maintenance group has never been activated because no repair service has been required, according to the provided case history.


A repeat customer in Turkey provides a different perspective. The customer purchased an HSM-CNC08 in 2018 and initially bought a separate length-checking machine because of concerns about machine stability. The length checker was ultimately unnecessary. In October 2026, the customer ordered two additional HSM-CNC08 machines.


These cases reflect individual customer reports rather than universal performance guarantees. They nevertheless provide useful information about long-term operating behavior and customer confidence.


Application Example: Precision Compression Springs


The HSM-CNC20 is suitable for compression springs within its specified 0.2–2.0 mm range, but the correct selection still depends on the spring design.


For a typical precision compression spring, the buyer should verify:


  • Wire diameter and material grade

  • Outside diameter and internal diameter

  • Total length and solid length

  • Number of active and total coils

  • End-closure requirements

  • Spring free length tolerance

  • Required production cycle time


The HSM-CNC08 offers a lower range of 0.08–1.0 mm for small-diameter applications, while the HSM-CNC30 covers 0.8–3.0 mm. CAMLESS models such as the HSM-CNC1025 provide servo-based control for applications where setup flexibility is important.


Key Factors for Importing Buyers


For buyers comparing a coil spring forming machine, a structured evaluation should include the machine configuration, tooling, accessories, installation requirements, and service terms.


The procurement review should cover:


  • Wire range and supported material types

  • Number and function of controlled axes

  • CAM or CAMLESS control architecture

  • Tooling package and included change parts

  • Motor, servo, and controller specifications

  • Machine dimensions, weight, and utility requirements

  • Spare-parts availability

  • Operator training and technical support

  • Delivery schedule and after-sales documentation


Dongzheng’s international sales record includes 40+ machines in Vietnam, 10+ in Brazil, and 5+ each in Indonesia and Korea. These figures indicate an established export support structure, although service scope and lead times should still be confirmed for each individual order.


Final Selection Criteria


The most reliable approach is to match the machine to the product, then test the total operating result. Wire range provides the first filter, but construction quality, control method, tooling, and service support determine how well the coil spring forming machine performs after installation.


For a wear-resistant spring making machine, inspect the actual wear components and movement design. For a copper wire coil machine, validate the configuration using the intended copper grade. And when comparing CAM and CAMLESS systems, consider how often products, tolerances, and production schedules will change.

 
 
 

Recent Posts

See All
Why Spring Dimensions Drift After Long Runs

The Problem Every Shop Eventually Sees You run a spring making machine for six hours straight. First part checks at ±0.01mm. By hour five, the outer diameter has crept up 0.03mm and the free length is

 
 
 
Why Spring Dimensions Drift After Long Runs

Every spring maker knows the feeling. You set up a machine on Monday, hit ±0.01mm all day, and by Friday the free length has crept 0.05mm and the load test is drifting out of tolerance. Nothing "broke

 
 
 

Comments


Welcome to DONGZHENG

AND GET YOUR SAMPLES READY

Limei Industrial zone, Dalang, Dongguan, Guangdong

+8613809822984
 

  • Facebook
  • Twitter
  • YouTube
  • LinkedIn

© 2026 by DONGHENG

bottom of page